VENTUM SATENSER №600 (25 kg)

VENTUM SATENSER №600 (25 kg) — a high-quality gypsum finishing plaster designed for final finishing of interior walls and ceilings. Produced by VENTUM Company in Uzbekistan. Used for smoothing surfaces before painting, wallpapering, or applying decorative coatings. Applies to various bases: gypsum board, concrete, cement, gypsum plasters, and others. Provides an ideal smooth finish, has high adhesion, and is easy to work with, making it a popular choice for both professionals and DIY repairs.

Features:

• Type: Finishing gypsum plaster
• Packaging: 25 kg (paper or plastic bag)
• Composition: High-quality gypsum, mineral fillers, polymer and modifying additives
• Application: Final smoothing of interior walls and ceilings before painting, wallpapering, or applying decorative coatings
• Compatibility: Compatible with bases such as gypsum board, concrete, cement, gypsum plasters, brick, and similar materials
• Consumption: 0.8–1.2 kg/m² for a 1 mm layer thickness
• Layer thickness: 0.5–3 mm (recommended), up to 5 mm in recesses
• Mixing time: 60–90 minutes after adding water
• Drying time: +20°C at normal humidity — 4–6 hours (full drying — 24 hours)
• Application temperature: +5°C to +30°C
• Color: White
• Grain size: Fine-grained (up to 0.2 mm)

Advantages:

• Ideal smoothness: Allows painting or wallpapering without additional processing, providing a perfectly flat and smooth surface.
• High adhesion: Excellent adhesion to bases such as gypsum board, concrete, and plaster.
• Easy application: Plastic consistency makes application and smoothing effortless, requiring minimal effort for leveling.
• Ecological safety: Made from safe materials, does not emit harmful substances, suitable for living spaces.
• Cost-effectiveness: Fine-grained structure and high adhesion ensure economical material usage.
• Versatility: Suitable for all types of interior finishing work, including preparation for decorative coatings.

Application features:

• Purpose: Used for final smoothing of walls and ceilings in dry rooms (living rooms, bedrooms, offices) before painting, wallpapering, or applying decorative coatings. Not recommended for humid environments without additional protection.
• Surface preparation: The base must be clean, dry, sturdy, free of dust, grease, and loose parts. Cracks and large irregularities must be filled in advance. Priming the surface is recommended to increase adhesion.
• Preparation: Gradually add dry mix (1 kg per 0.4–0.5 L of water) to water, mixing with a mixer or drill attachment until a homogeneous mass is obtained. After 3–5 minutes, mix again.
• Application: Apply thinly (0.5–3 mm) evenly with a trowel. For ideal smoothness, applying 1–2 layers is recommended. After drying, the surface can be lightly sanded with fine-grit sandpaper.
• Care: Remove excess plaster before it dries with a damp cloth. Clean tools immediately after use with water. Protect the surface from drafts and direct sunlight during drying.

Storage conditions: Store in a dry place, in a sealed package, at temperatures between +5°C and +30°C. Shelf life — 12 months from the date of manufacture.