VENTUM ELASTIK 510 Enhanced Two-Component Adhesive

Enhanced two-component adhesive VENTUM ELASTIK 510

Features:

• Type: Cement-based two-component adhesive mixture with latex component

• Information: For installation of ceramic tiles, ceramic granite, marble, granite, mosaic made of glass, tiles made of natural and artificial stone (water absorption rate <1%)

• Weight: 20 kg (dry mix) + latex component (volume specified by supplier, typically 4–5 L)

• Maximum tile size: Suitable for large-format tiles (up to 1200×1200 mm, depending on the substrate)

• Adhesive layer thickness: 2–10 mm

• Amount: 2.5–8 kg/m² (depending on tile size, substrate type, and layer thickness)

• Mixing ratio: Determined based on manufacturer's instructions (typically 4–5 L latex component for 20 kg dry mix)

• Ready mix usage time: 2–3 hours (with continuous stirring)

• Open time: 20–30 minutes

• Tile adjustment time: 30–40 minutes

• Application temperature: +5…+30 °C

• Air humidity during work: 50–70%

• Drying time:

  • For adhesive tiles: After 24–48 hours

  • Full operational load: After 7 days

  • Filling gaps between tiles: After 24–48 hours

• Frost resistance: High, ≥50 cycles

• Water resistance: High, suitable for pools and high-humidity areas

• Composition:

  • Dry mix: Cement (including white cement), fractionated quartz sand, mineral fillers, polymer modifiers

  • Liquid component: Latex emulsion

• For substrates: Concrete, cement-sand screed, brick, plastered surfaces, gypsum board, aerated concrete, old tiles, deformable substrates (plywood, MDF with moisture-resistant treatment)

• Adhesive class: C2TE S1 (per GOST R 56387, improved elastic adhesive with extended open time and no vertical slip)

• Packaging: Bag of dry mix (20 kg) and canister with latex component

• Shelf life: 12 months, in a dry place, in factory packaging