Ventum Decofer Klassik №203 — high-quality cement-based decorative plaster designed for final finishing of exterior and interior spaces. Produced by MAGMA GROUP in Uzbekistan under the Ventum® brand, known for innovative construction mixes and paint products. This plaster creates decorative patterns such as ‘crackle’, ‘fur’ or smooth texture depending on the application technique.
Features:
Type: Cement-based decorative plaster
Weight: 25 kg
Color: White (coloring options available for various shades)
Base: Cement, polymer modifiers, mineral fillers
Finish: Textured surface resistant to atmospheric effects
Application: Used for finishing facades and interior walls of concrete, brick, damp surfaces, and gypsum board
Compatibility: Suitable for mineral surfaces and thermal insulation systems
Advantages:
Hydrophobicity: Repels moisture while maintaining wall breathability.
Decorative effect: Creates various patterns (‘crackle’, ‘fur’, or smooth texture) depending on application technique, ensuring aesthetic appeal.
Ecological purity: Contains no toxic substances, safe for health and the environment.
Durability: Resistant to UV rays, temperature fluctuations, mechanical stress, and fading.
Versatility: Suitable for both interior and exterior work, including humid rooms.
Application features:
For interior and exterior work: Used for decorative finishing of facades, interior walls, and ceilings.
Surface preparation: Surface must be clean, dry, and primed with a deep-penetrating primer (Ventum primer is recommended). Remove dust, grease, oil stains, and old coatings. Apply plaster no sooner than 7–14 days after painting.
Mix preparation: Thoroughly mix the dry mix with clean water (approximately 5–6 liters per 25 kg) until a homogeneous mass is obtained using a construction mixer. Let the mixture rest for 5–10 minutes, then remix. Do not add lime, gypsum, or cement as additives.
Application: Apply with a trowel, spatula, or specialized texturing tool in 1–2 layers at temperatures between +5°C and +35°C. Avoid applying to frozen surfaces or under direct sunlight. Moisten the coating for 2–3 days to enhance durability.
Consumption: 1.5–2.5 kg/m² per 1–2 mm layer (depending on application technique and texture).
Safety precautions: Wear protective gloves and goggles, avoid inhaling dust. Rinse eyes thoroughly with water if exposed.
Storage conditions:
Store at temperatures between +5°C and +30°C in a dry place in undamaged packaging. Shelf life — 12 months from the date of manufacture.
