MEGAMIX Primer (10 kg) This is a universal deep-penetration primer designed for surface preparation before applying finishing materials. Produced by MEGAMIX, known for its high-quality construction mixes. The primer reduces the absorptive capacity of the surface, strengthens it, improves adhesion, and ensures a strong bond with subsequent coating layers such as plaster, joint compound, paint, or tile adhesive. The product is ideal for porous and absorbent surfaces like drywall, brick, concrete, aerated concrete, and cement bases. Suitable for both interior and exterior work, it strengthens the surface, reduces dust formation, and lowers the consumption of finishing materials. Thanks to its environmentally friendly composition, it is safe for use in residential spaces.
Features:
- Type: Deep-penetration primer (ready-to-use)
- Packaging: 10 kg
- Composition: Acrylic polymers, water, special additives
- Application: Preparation of porous and absorbent surfaces (drywall, brick, concrete, aerated concrete, cement bases) before applying plasters, joint compounds, paints, or tile adhesives
- Compatibility: Compatible with water-based paints, gypsum and cement plasters, joint compounds, and tile adhesives
- Consumption: 0.1–0.2 kg/m² (depends on the surface's absorptive capacity)
- Drying time:
- Tack-free: 1–2 hours at +20°C and normal humidity
- Fully dry: 4–6 hours (depending on conditions)
- Application temperature: From +5°C to +35°C
- Operating temperature: From −20°C to +70°C
- Color: Transparent or slightly off-white (becomes transparent after drying)
- Features: Solvent-free, vapor-permeable, strengthens the surface, reduces absorption, prevents dust formation
- Density: ~1.0–1.1 kg/l
Advantages:
- Surface strengthening: Strengthens porous and loose bases, extending the service life of finishing coatings.
- Reduced absorption: Decreases moisture absorption by the surface, reducing the consumption of paints and plasters.
- Increased adhesion: Ensures reliable bonding of finishing materials (paints, plasters, adhesives) to the substrate.
- Eco-friendliness: Contains no solvents or harmful substances, safe for use in residential areas, vapor-permeable.
- Easy application: Supplied ready-to-use, requires no dilution, easily applied with a brush, roller, or sprayer.
- Economy: Low consumption (0.1–0.2 kg/m²) makes the product cost-effective for treating large areas.
- Versatility: Suitable for both interior and exterior work, as well as various surfaces and finishing materials.
Application specifics:
- Purpose: Used for preparing porous and absorbent bases (drywall, brick, concrete, aerated concrete, cement surfaces) before applying plasters, joint compounds, paints, or tile adhesives. Applied for interior and exterior work in residential, commercial, and public spaces.
- Surface preparation: The surface must be clean, dry, free of dust, grease, delamination, or loose areas. If mold is present, the surface must be cleaned and treated with a fungicide.
- Preparation: The primer is ready to use. Before application, thoroughly stir the contents of the bucket. Dilution with water or mixing with other materials is not recommended.
- Application: Apply with a brush, roller, or sprayer in one or two even layers. For large areas, a spray gun is convenient. Work at temperatures between +5°C and +35°C and relative humidity no higher than 80%. Avoid drafts and direct sunlight during application and drying.
- Care: Clean tools with clean water immediately after use while the primer is still wet. Protect the applied layer from moisture, dust, and mechanical damage for 4–6 hours. Subsequent finishing work should only be carried out after the primer has fully dried.
- Safety precautions: Work in a well-ventilated area, wear protective gloves, and use protective goggles if necessary. Avoid contact with eyes and skin. Rinse immediately with plenty of water if contact occurs.
Storage conditions: Store in a sealed container in a dry place, protected from direct sunlight, at temperatures between +5°C and +30°C. Avoid freezing. Shelf life: 12 months from the date of manufacture.
Manufacturer country: Uzbekistan
