MEGAMIX HYDRO-STOP WATERPROOF (10 kg)

MEGAMIX Hydro-Stop Suvi (10 kg) This is a specialized hydroinsulation material designed to protect surfaces from water and moisture penetration during construction and repair work. Produced by MEGAMIX, known for its high-quality building materials. The product effectively protects concrete, brick, drywall, cement bases, and other building materials from moisture damage. Suitable for use in high-humidity conditions such as bathrooms, kitchens, basements, or exterior walls. Hydro-Stop Suvi forms a thin yet durable hydroinsulation layer that prevents water penetration and ensures the longevity of the surface. Thanks to its environmentally friendly composition, it is safe for use in residential spaces as well as for exterior applications.

Features:

• Type: Dry hydroinsulation mix
• Packaging: 10 kg 
• Composition: Cement, polymer additives, quartz sand, special water-repellent components
• Application: Protection of concrete, brick, cement bases, drywall, and other building materials from water and moisture; used in bathrooms, kitchens, basements, exterior walls, and other humid environments
• Compatibility: Works well with tile adhesives, plasters, and other finishing materials
• Consumption: 1.5–2.0 kg/m² (for a 1 mm thick layer, depending on surface type)
• Drying time:
  • Initial drying: 24 hours at +20°C
  • Full drying: 7–14 days (depending on conditions)
• Application temperature: From +5°C to +30°C
• Operating temperature: From −30°C to +70°C
• Features: High waterproofing, strong adhesion, mechanical strength, resistance to alkaline environments, ease of application
• Layer thickness: 1–3 mm (recommended)

Advantages:

• Effective hydroinsulation: Completely prevents water and moisture penetration, protecting building structures.
• Durability: Resistant to mechanical stress, ensuring the longevity of the surface.
• Versatility: Used for both interior and exterior work on various surfaces (concrete, brick, drywall) and in humid environments.
• Eco-friendliness: Contains no harmful substances, safe for use in residential spaces.
• Ease of application: The dry mix is easily mixed with water and applied with a brush, roller, or trowel.
• Cost-effectiveness: Optimal consumption (1.5–2.0 kg/m²) makes the product cost-effective for treating large areas.
• Durability: Resistant to alkaline environments and temperature fluctuations, maintains coating quality over a long period.

Application specifics:

• Purpose: Used to protect concrete, brick, drywall, cement bases, and other materials from water penetration. Applied in bathrooms, kitchens, basements, exterior walls, and other humid conditions.
• Surface preparation: The surface must be clean, dry, free of dust, grease, and loose areas. Cracks or damaged areas are repaired beforehand. If mold is present, the surface is treated with a fungicide.
• Preparation: The dry mix is mixed with clean water in the ratio indicated on the package (typically 0.2–0.25 liters of water per 1 kg of mix). Stir until a homogeneous mass is obtained. Use the ready mix within 1–2 hours.
• Application: Apply with a brush, roller, or trowel in a 1–3 mm thick layer, either in one or two coats. Each layer is applied after the previous one has dried (approximately 24 hours later). Work at temperatures between +5°C and +30°C and relative humidity no higher than 80%. Avoid direct sunlight and drafts during application and drying.
• Maintenance: Clean tools with clean water immediately after use while the mix is still wet. Protect the applied layer from moisture and mechanical stress for 7–14 days. Subsequent finishing work (tile installation, plastering) should only be carried out after full drying.
• Safety precautions: Work in a well-ventilated area, use protective gloves, goggles, and a mask to protect the respiratory system. Avoid getting the mix in the eyes or on the skin. Rinse thoroughly with water if contact occurs.