ELERON ECO BOND 25 kg (Rotband)

Features:

• Type: Gypsum-based adhesive with light fillers
• Packaging: 25 kg
• Composition: Gypsum, mineral fillers, polymer additives, and eco-friendly components
• Application: For bonding gypsum board panels, leveling decorative elements and surfaces (walls, ceilings)
• Compatibility: Suited for brick walls, concrete, aerated concrete, and gypsum bases
• Consumption: 0.8–1.2 kg/m² (depending on layer thickness and surface type)
• Drying Time: Non-setting state — 2–3 hours, full drying — 24–48 hours (+20°C and 65% humidity)
• Application Temperature: +5°C to +30°C
• Layer Thickness: 2–10 mm (recommended)

Advantages:

• Eco-friendly composition without harmful substances, suitable for living spaces.
• High adhesion to various surfaces, including concrete and brick.
• Plastic consistency for easy application and leveling.
• Resistance to cracks and deformations when applied correctly.
• Economical consumption due to light fillers.
• Suitable for residential, office, and public spaces with normal humidity.

Application Features:

• Purpose: Used for bonding gypsum board panels, installing decorative panels, and leveling walls or ceilings. Prepares surfaces for painting, wallpapering, or decorative finishing.
• Surface Preparation: Surface must be clean, dry, free of dust, grease, and loose particles. Priming is recommended to enhance adhesion.
• Preparation: Dry mix (0.4–0.5 l of water per 1 kg) is gradually added to water and mixed with a mixer or by hand until smooth. After 5 minutes, mix again.
• Application: Applied evenly with a trowel or spatula. For gypsum board, applied in dots or lines. Leveling is done within 30–40 minutes after application.
• Care: Surface is ready for further processing (sanding, painting) after 24–48 hours. Tools must be rinsed with water immediately after use.

Storage Conditions: Store in a dry place in a sealed package at temperatures between +5°C and +30°C. Shelf life — 12 months from the date of manufacture.