ELERON 10 Self-Leveling Floor

Properties

• Type: Self-leveling pour floor mix.
• Composition: Cement-based, mineral fillers, modifying additives.
• Package Weight: 25 kg.
• Color: Grayish.
• Consumption: 1.5–1.7 kg/m² per 1 mm layer.
• Layer Thickness: 2–10 mm (recommended).
• Shelf Life: 12 months in a dry place.
• Setting Time:
  • Foot Traffic: 24 hours.
  • Full Hardening: 28 days.
• Operating Temperature: from +5°C to +30°C.
• Adhesion Strength: ≥0.6 MPa.
• Compressive Strength: ≥15 MPa.
• Features:
  • High fluidity and self-leveling.
  • Resistance to cracks and shrinkage.
  • Compatibility with underfloor heating systems (heating up to 50°C).
  • Possibility of manual and mechanical application (screw pumps).

Advantages

• Ideal smooth surface for finishing coatings.
• Easy and quick to apply due to self-leveling properties.
• Compatibility with underfloor heating systems.
• High strength and durability.
• Environmental safety.

Application

• Leveling concrete and cement-sand bases in living and public areas.
• Preparing the floor for linoleum, laminate, parquet, ceramic tile.
• Application in underfloor heating systems.
• Limitations:
  • Only for interior, dry and normal humidity rooms.
  • Do not use on wooden, metal, or plastic bases.
  • Do not apply at temperatures below +5°C or at high humidity.
  • Do not use as a finish coating without laying decorative coating.

Application Procedure

1. Clean the base from dust, dirt, grease, and old coatings. Ensure the strength (≥15 MPa) and dryness of the surface.
2. Treat the surface with a penetrating primer (e.g., acrylic) 1–2 times to improve adhesion and remove dust.
3. Mix the mixture with water (0.18–0.22 l per 1 kg, 4.5–5.5 l per 25 kg) to a homogeneous consistency. Let it stand for 3–5 minutes and mix again.
4. Pour the mixture onto the floor and spread it with a trowel or float. Level and remove air bubbles with a needle roller, applying a thin layer no more than 2 cm thick.
5. Protect the surface from drafts, direct sunlight, and temperature changes for 24 hours.
6. Foot traffic is possible after 24 hours, flooring installation is recommended after 7–14 days, and underfloor heating activation after 28 days (start from 25–27°C).
7. After work, thoroughly wash the tools with water.
8. Store in a dry place, out of reach of children.