ELERON C-01 – a gypsum-based joint compound for leveling walls and ceilings in dry indoor spaces. Used for preparing surfaces for painting, wallpapering, or decorative finishes. Suitable for concrete, cement, gypsum, damp surfaces, gypsum board, and tongue-and-groove panels. Provides a smooth, durable, and crack-free finish due to high adhesion and elasticity. Ecologically safe, compliant with ISO 9001:2001 quality standards.
Features
- Type: Gypsum-based joint compound for interior work.
- Composition: Gypsum, mineral fillers, modified polymer additives.
- Package weight: 20 kg.
- Color: White.
- Consumption: 0.9–1.3 kg/m² for a 1 mm layer.
- Layer thickness: 0.5–8 mm (recommended).
- Shelf life: 12 months in a dry place.
- Drying time: 4–8 hours (depending on layer thickness and conditions).
- Setting time: 60–120 minutes.
- Operating temperature: +5°C to +30°C.
- Adhesion strength: ≥0.5 MPa.
- Features:
- High adhesion to concrete, gypsum board, cement, and gypsum surfaces.
- Elasticity, resistance to shrinkage cracks.
- Easy to apply and sand (with P180–P240 grit sandpaper).
- Suitable for sealing GKL/GVL joints with reinforcing tape.
- Manual and mechanical application possible.
Advantages
- Creates a smooth and even surface for painting and wallpapering.
- Economical consumption compared to cement mixes.
- Easy to apply with high elasticity.
- Ecologically safe, suitable for living spaces.
- Provides air permeability and thermal insulation.
Application
- Leveling walls and ceilings in dry spaces (residential rooms, offices).
- Sealing GKL/GVL joints with reinforcing tape.
- Preparing surfaces for painting, wallpapering, or decorative finishes.
- Limitations:
- Only for use in dry indoor spaces (not suitable for bathrooms, kitchens with high humidity).
- Not applied to wooden, metal, or plastic surfaces.
- Do not apply at temperatures below +5°C or when air humidity exceeds 70%.
- Not applied to frozen or excessively damp surfaces.
Application instructions
- Clean the surface of dust, dirt, grease, old paint, or moisture. Remove loose areas.
- For improved adhesion and dust removal, apply deep-penetrating acrylic primer and wait 4–6 hours for drying.
- Mix the compound with clean water (0.4–0.5 L per 1 kg, 8–10 L per 20 kg) until homogeneous using a construction mixer. Stir for 3–5 minutes, then remix.
- Apply a 0.5–8 mm layer with a spatula or trowel. Use a narrow spatula and reinforcing tape for GKL joints.
- For multiple layers, wait for the previous layer to dry (4–8 hours) and apply primer between layers.
- After drying (4–8 hours), sand if necessary with P180–P240 grit sandpaper.
- Rinse tools immediately after use.
- Store in a dry place, away from children.
