ELERON C-05 – a high-quality gypsum-based putty designed for internal dry spaces to level walls and ceilings. Used for surface preparation under painting, wallpapering, or decorative finishes. Suitable for concrete, cement, gypsum, damp surfaces, gypsum board, and tongue-and-groove panels. Provides a flawless smooth finish due to high adhesion and elasticity. Ecologically safe, compliant with ISO 9001:2001 standard.
Features
Type: Gypsum putty for interior work.
Composition: Gypsum, mineral fillers, modified polymer additives.
Packaging weight: 20 kg.
Color: White.
Consumption: 0.8–1.2 kg/m² for a 1 mm layer.
Layer thickness: 0.5–5 mm (recommended).
Shelf life: 12 months in a dry place.
Drying time: 4–6 hours (depending on layer thickness and conditions).
Setting time: 60–90 minutes.
Operating temperature: +5°C to +35°C.
Adhesion strength: ≥0.5 MPa.
Features:
High adhesion to concrete, gypsum board, cement, and gypsum surfaces.
Elasticity and crack resistance.
Easy to apply and sand (with P180–P240 grit).
Often does not require priming before finishing.
Can be applied manually or mechanically.
Advantages
Creates a perfectly smooth surface for painting and wallpapering.
2–3 times more economical than cement mixes.
High elasticity and ease of use.
Ecological safety.
Provides thermal insulation and air permeability.
Application
Leveling walls and ceilings in dry rooms.
Sealing joints of GKL/GVL with reinforcing tape.
Preparing surfaces for painting, wallpapering, and decorative finishes.
Limitations:
Only for use in dry interior spaces (not for bathrooms or pools).
Not for use on wooden, metal, or plastic surfaces.
Cannot be applied below +5°C or at high humidity (>70%).
Not for use on frozen or excessively damp surfaces.
Application instructions
Clean the surface of dust, dirt, grease, old paint, or moisture. Remove old coverings.
Apply deep-penetrating acrylic primer to improve adhesion and remove dust, let dry for 4–6 hours.
Mix the compound with clean water (0.45–0.55 L per 1 kg, 9–11 L per 20 kg) until homogeneous using a construction mixer. Wait 3–5 minutes and remix.
Apply a 0.5–5 mm layer with a spatula or trowel. Use a narrow spatula and reinforcing tape for GKL joints.
For multiple layers, wait for the previous layer to dry (4–6 hours) and apply primer between layers.
After drying (4–6 hours), sand if necessary with P180–P240 grit.
Rinse tools immediately after use.
Store in a dry place, away from children.
