Type: Two-component cement-based adhesive with latex component
Purpose: For installation of ceramic tile, porcelain stoneware, marble, granite, glass mosaic, natural and artificial stone slabs (with water absorption <1%)
Weight: 20 kg (dry mix) + latex component (volume confirmed with supplier, typically 4–5 L)
Maximum tile size: Suitable for large tiles (up to 1200×1200 mm, depending on substrate)
Adhesive layer thickness: 2–10 mm
Consumption: 2.5–8 kg/m² (depending on tile size, substrate type and layer thickness)
Mixing ratio: Specified in manufacturer’s instructions (typically 20 kg dry mix to 4–5 L latex component)
Working time of ready mix: Up to 2–3 hours (with periodic stirring)
Open time: Up to 20–30 minutes
Tile adjustment time: Up to 30–40 minutes
Application temperature: +5…+30 °C
Air humidity during installation: 50–70%
Drying time:
Walking on floor tile: After 24–48 hours
Full operational load: After 7 days
Joint grouting: After 24–48 hours
Frost resistance: High, ≥50 cycles
Water resistance: High, suitable for pools and high-humidity environments
Composition:
Dry mix: Cement (including white cement), fractionated quartz sand, mineral fillers, polymer modifying additives
Liquid component: Latex emulsion
Substrates for installation: Concrete, cement-sand screed, brick, plastered surfaces, drywall, aerated concrete, old tiles, deformable substrates (plywood, MDF with moisture-resistant treatment)
Adhesive class: C2TE S1 (per GOST R 56387, improved elastic adhesive with extended open time and no vertical slippage)
Packaging: Kit with a bag of dry mix (20 kg) and a canister of latex component
Shelf life: 12 months in a dry place in original packaging
Manufacturer country: Uzbekistan
