TEH TH2609 Hammer Drill

TEH TH2609 An electric SDS-Plus hammer drill designed for prolonged and intensive work on drilling holes, creating grooves, and breaking hard materials such as brick, concrete, natural and artificial stone. Equipped with an 800 W motor and features three operating modes: drilling, drilling with impact, and chiselling. Suitable for home and semi-professional construction and repair tasks. Shipped in a convenient case for transportation and storage. Manufactured in: China.

Specifications

• Type: Electric SDS-Plus hammer drill.
• Purpose: Drilling holes, groove cutting, breaking concrete, brick, and stone.
• Power Supply: Mains 220 V, 50 Hz.
• Motor Power: 800 W.
• No-load Speed: 0–900 RPM.
• Impact Speed: 0–5500 SPM.
• Impact Force: 3 J.
• Maximum Drilling Diameter:
  • Concrete: 26 mm.
  • Steel: 13 mm.
  • Wood: 30 mm.
• Patron Type: SDS-Plus (for quick tool changes).
• Features:
  • Three operating modes: drilling, drilling with impact, chiselling.
  • Soft start to reduce motor load.
  • Safety clutch to protect against jamming of tools.
  • Additional handle for secure grip.
  • Dust cover included.
  • Shipped in a plastic case.
• Contents: Hammer drill, SDS-Plus drills (8×150 mm, 10×150 mm, 12×150 mm), 2 chisels, additional handle, depth limiter, dust cover, oil tube, instruction manual, case.
• Dimensions: ~350×250×100 mm (approximate, confirm with supplier).
• Weight: ~3.3 kg.
• Protection Class: IP20 / II (double insulation).
• Warranty: 6–12 months (confirm with supplier).
• Advantages

• High performance due to 800 W power and 3 J impact force.
• Versatility thanks to three operating modes.
• Easy and quick tool changes thanks to the SDS-Plus chuck.
• Soft start reduces motor wear and increases comfort.
• Compact weight (3.3 kg) and ergonomic handle for ease of use.
• Shipped in a case for convenient transportation and storage.

Applications

• Drilling holes in concrete, brick, and stone for anchor and dowel installation.
• Creating grooves for wiring or piping.
• Chiselling for demolition of old structures (tiles, plaster).
• Drilling in wood, metal, and plastic in non-impact mode.
• Use in construction, repair, and finishing work.
• Limitations:
  • Not designed for intensive professional use (recommended intermittent operation).
  • Do not use in wet conditions (IP20 protection class).
  • Not suitable for materials requiring an SDS-Max chuck.

Instructions for Use

1. Check the integrity of the hammer drill, cable, and accessories before starting work.
2. Install the appropriate tool (drill bit, chisel, or pick) in the SDS-Plus chuck, ensuring secure fixation.
3. Select the operating mode (drilling, drilling with impact, chiselling) using the switch.
4. Connect the hammer drill to the 220 V mains supply.
5. Wear protective gear (goggles, gloves, earplugs).
6. Use the additional handle for secure grip and begin work, gently pressing the tool against the surface.
7. Adjust the drilling depth using the limiter if necessary.
8. Allow the tool to cool if it overheats.
9. After use, disconnect the hammer drill from the mains, clean it of dust, and store it in the case in a dry place.