MARSHALL IZOLASIYON ASTARI 2.5L

Specifications:

• Type: Acrylic Insulation Primer

• Packaging: 2.5 liters

• Color: Milky white (transparent after drying)

• Flow rate: 8–12 m²/l (depending on surface conditions)

• Drying time: 1-2 hours for sticking, full drying – 24 hours

• Dilution: With water (up to 10%, if needed)

• Shelf life: 24 months (in the original unopened container)

• Application temperature: +5°C to +30°C

Properties:

• Deep penetration into the base

• Improves adhesion of subsequent coatings

• Evens out and reduces absorbency

• Prevents stains and efflorescence

• Vapor-permeable, environmentally friendly

Scope of application:

• Concrete, cement, plaster

• Plasterboard, putty surfaces

• Brick and aerated concrete walls

Limitations:

• Do not apply to wet, frozen, or dusty surfaces

• Do not use at temperatures below +5°C and high humidity

Instructions for use:

1. Clean the surface of dust, dirt, grease and peeling materials

2. If necessary, seal cracks and defects

3. Before use, stir the primer

4. Apply with a brush, roller or spray in 1 coat

5. Avoid the formation of drips and puddles

6. Allow to dry for at least 1-2 hours before applying the next coat