EEP-28-3 EPA Hammer Drill

EPA EEP-28-3 – a professional hammer drill with a vertically mounted motor designed for drilling holes in concrete, brick, stone, and for demolition work. Equipped with an SDS-Plus chuck and a powerful motor (1010 W), it supports three modes: drilling, hammer drilling, and chiselling. Suitable for professional and home use, especially for drilling holes for under-socket boxes and full-length drills. Ergonomic D-shaped handle, dust protection, and self-resetting carbon brushes ensure comfort and durability.epa.uz

Specifications

• Type: Hammer drill.
• Model: EEP-28-3.
• Power: 1010 W.
• Voltage: 220 V, 50 Hz.
• Rotation speed: 980 RPM.
• Impact energy: 4.5 J.
• Operating modes: Drilling, hammer drilling, chiselling.
• Chuck type: SDS-Plus (28 mm).
• Drilling diameter
  • Concrete: up to 28 mm.
  • Wood: up to 40 mm.
  • Metal: up to 13 mm.
• Features
  • Self-resetting carbon brushes for collector protection.
  • Ergonomic D-shaped handle and additional handle with depth limiter.
  • Dust protection and low vibration.
• Packaging: Hammer drill, additional handle, depth gauge, cloth, flat chisel, pointed chisel, concrete drills (8 mm, 10 mm, 12 mm), plastic case, manual, warranty card.
• Weight: Approximately 5–6 kg.
• Manufacturer: EPA (China).

Advantages

• Power: 1010 W and 4.5 J for efficient drilling of hard materials.
• Versatility: Three modes for drilling, hammer drilling, and chiselling.
• Durability: Dust protection and self-resetting brushes extend service life.
• Convenience: Ergonomic design and case for storage/transport.
• Packaging: Includes drills and chisels for immediate use.

Application

• Construction and repair: Drilling holes in concrete, brick, stone (up to 28 mm).
• Demolition work: Medium-level chiselling for demolition.
• Drilling: Metal (up to 13 mm), wood (up to 40 mm).
• Limitations
  • Not suitable for precise work on fragile surfaces (e.g., ceramics, tiles) due to cracking risk.
  • Requires breaks during prolonged use to prevent overheating.
  • Does not replace a drill for soft materials (e.g., drywall).

User instructions

1. Preparation: Check compatibility of the drill/bit (SDS-Plus), clean the work area.
2. Safety measures: Use protective goggles, gloves, and install the additional handle.
3. Operation: Select the mode (drilling, hammer drilling, chiselling), turn on the tool, gently press against the surface.
4. Maintenance: Regularly clean ventilation openings from dust.
5. Storage: Dry place, 0°C–30°C, away from moisture.
6. Safety precautions: Work in a ventilated room, turn off power when changing attachments, store away from children.