EPA EN-PS12-160 Concrete Drill Bit
Description
EPA EN-PS12-160 Concrete Drill Bit – a high-quality SDS-Plus percussion drill bit designed for professional work with hard materials such as concrete, brick, stone, and others. Manufactured under the EPA brand in China according to quality standards, ensuring reliability and durability. The drill is equipped with a carbide-tipped insert (typically tungsten carbide with cobalt), providing high strength and wear resistance. The drill geometry facilitates efficient removal of dust and drilling debris, as well as precise drilling. Suitable for use in construction, repairs, installation, and other tasks requiring drilling holes in hard materials.
Features
Product Type: Concrete drill bit, percussion.
Article Number: EN-PS12-160.
Drill Diameter: 12.0 mm.
Material: Carbon steel with carbide-tipped insert (tungsten carbide with cobalt).
Shank Type: SDS-Plus.
Overall Length: 160 mm.
Working Length: 100 mm.
Purpose: Drilling concrete, brick, stone, silicate brick, and other hard materials.
Drill Type: Spiral (twist).
Packaging: Drill bit (single unit or sets).
Operating Temperature: -10°C to +50°C.
Service Life: Up to 2–3 years with proper use.
Packaging: Plastic holder or blister pack.
Manufacturer Country: China.
Warranty: 6 months (depending on region, e.g., in Uzbekistan).
Approximate Price in Uzbekistan: 15,000–30,000 uzbek som per unit (based on prices for similar drill bits, e.g., on prom.uz, market.sello.uz).
Advantages
High Strength: Carbide-tipped insert ensures resistance to wear and high loads.
Efficiency: Drill geometry promotes quick removal of dust and debris, speeding up the drilling process.
Precision: Suitable for creating precise 12 mm diameter holes in hard materials.
Compatibility: SDS-Plus shank is compatible with most modern hammers/drills.
Affordable Price: Approximately 15,000–30,000 uzbek som in Uzbekistan, making the drill cost-effective for both household and professional use.
Versatility: Suitable for concrete, brick, stone, and other hard materials.
Applications
Construction: Drilling holes for anchors, dowels, and reinforcement in concrete and brick.
Repair Work: Used for installing structures, plumbing, electrical work, and furniture.
Installation: Suitable for tasks requiring precise drilling in hard materials.
Limitations: Not recommended for drilling metals or wood (specialized drill bits required). For reinforced concrete, use drills with reinforced inserts.
Instructions for Use
Preparation:
Check the drill for damage (cracks, chips on the cutting edge).
Clean the working surface of the material from dirt and dust.
Secure the workpiece if necessary to prevent shifting.
Installation:
Insert the drill into the hammer/drill chuck with the SDS-Plus shank, ensuring secure fastening.
Ensure the hammer/drill is set to the drilling mode with impact.
Operation:
Mark the drilling spot.
Apply moderate pressure, allowing the drill to work with the hammer’s impact.
Periodically pull out the drill to remove dust and debris.
For prolonged drilling, use a lubricating-cooling liquid (e.g., water) to reduce heat.
Cleaning and Storage:
After use, clean the drill of dust and construction debris with a dry cloth or brush.
Store in a dry place at temperatures from -10°C to +50°C, in protective packaging.
Safety Precautions:
Work in safety goggles and gloves to protect against dust and debris.
Do not use the drill for materials not matching its purpose (e.g., metal).
Avoid excessive pressure to prevent damage to the drill or hammer/drill.
Store out of reach of children.
