Black Granite EPA Adhesive

Technical specifications:

• Type: Black cement tile adhesive

• Colour: Black

• Packaging: (specify actual, e.g. 25 kg)

• Purpose: Fixing granite, marble, ceramic granite, and tile

• Consumption: 3–5 kg/m² (depending on tile size and layer thickness)

• Layer thickness: 2–10 mm

• Adjustment time: up to 20 minutes

• Setting time: 24 hours (full strength after 7 days)

• Application temperature: from +5°C to +30°C

Properties:

• High adhesion to mineral substrates

• Resistance to slippage during vertical installation

• Black colour – prevents discolouration of dark cladding materials

• Waterproof and frost-resistant

• Suitable for underfloor heating systems

Area of application:

• Internal and external walls and floors

• Bathrooms, kitchens, pools

• Stone and ceramic coverings

Restrictions:

• Do not apply to weak or dusty substrates

• Do not use at temperatures below +5°C and above +30°C

Application instructions:

1. Prepare the substrate – clean of dust, dirt, grease, and weak areas

2. Pour clean water into a container (about 6–6.5 l per 25 kg of dry mix)

3. Gradually add adhesive while mixing with a mixer until a homogeneous mass is obtained

4. Hold for 5 minutes and mix again

5. Apply with a notched trowel to the surface and set the tile

6. Adjust position within 20 minutes

7. Allow to dry for at least 24 hours before grouting joints