ABC PENA 860 (750ML)

ABC PENA 860 (750ML) — this is polyurethane foam used in construction and renovation works in Uzbekistan. The 750 ml cartridge is designed for application using a straw applicator or gun applicator. This foam is used for filling cracks, sealing, thermal and acoustic insulation. Detailed product information is unavailable, so the description is based on typical polyurethane foams (e.g., Akfix 805, Soudal Gunfoam) and market data.

Features:

Type: Polyurethane foam (single-component, cures under moisture)

Volume: 750 ml (cartridge for straw or gun applicator)

Color: Usually light yellow or beige

Material: Polyurethane-based

Application: Installing window and door frames, filling cracks, thermal and acoustic insulation, sealing pipes

Advantages:

• High expansion ratio — fills voids (approximately 40–50 liters of cured foam).

• Resistant to moisture and temperature fluctuations (-40°C to +90°C).

• Thermal and acoustic insulation properties (DIN 4102 B3 fire resistance class).

• Curing time: Surface — 10–20 minutes, full — 24 hours.

• After curing, cutting, smoothing, and painting are possible.

Usage:

• Installing windows and doors

• Filling cracks in walls and floors

• Insulating electrical outlets and water pipes

• Sealing roof structures

• Construction and renovation works

Additional advantages:

• Versatility — suitable for concrete, wood, metal, plastic (excluding PE, PP, PTFE), and drywall.

• High insulation — effectively retains heat and sound, aiding energy efficiency.

• Easy application — used with a straw or gun applicator.

• Long service life — moisture- and UV-resistant after curing.

• Price — in Uzbekistan, polyurethane foams cost approximately 30,000–80,000 soums (based on prom.uz, glotr.uz data, 2025).

Application tips:

• Shake the cartridge for 20–30 seconds before use.

• Clean and dry the surface (free of dirt, grease, moisture); moisture accelerates curing.

• Hold the cartridge upside down and dispense foam through the straw or gun.

• Fill the void about 1/3, as the foam expands.

• Protect the surface from pressure for 24 hours; moisture is required for curing.

Safety:

• Work in a well-ventilated area, wear gloves and goggles.

• Avoid contact of foam with skin and eyes.

• Remove cured foam mechanically (by cutting).

Storage conditions:

• Store in a dry and cool place (5°C–25°C).

• Keep the cartridge upright and prevent freezing.

• Use an opened cartridge within 1–2 months.