Specifications:
Type: Cement Tile Adhesive
Weight: 25 kg
Color: White (OQ is "oq" in Uzbek, denotes white)
Base: Cement, mineral fillers, polymer additives
Application: Laying ceramic tiles, porcelain stoneware, mosaics, natural and artificial stone on concrete, brick, plaster, plasterboard
Compatibility: Suitable for high-stress surfaces, including underfloor heating and facades
Advantages:
High adhesion: Provides strong adhesion to a variety of substrates, including complex surfaces.
Versatile: Suitable for indoor and outdoor use, as well as for wet areas (bathrooms, swimming pools).
Frost and moisture resistance: Resistant to temperature extremes and moisture, ideal for exterior cladding.
Elasticity: Polymer additives increase resistance to deformation and vibration.
Easy to use: Easy to knead and apply, has good plasticity.
Features of application:
Surface preparation: The surface should be clean, dry, durable and treated with a primer (Ventum primer is recommended). Remove dust, dirt, grease and peeling coatings.
Preparation of the mixture: Mix the dry mixture with clean water (approx. 5.5 to 6 litres per 25 kg) until smooth without lumps using a mixer. Let the mortar settle for 5 to 10 minutes, then stir again.
Application: Apply the adhesive with a notched trowel (the size of the tines depends on the size of the tile). Lay the tiles within 10-15 minutes after applying the glue.
Working conditions: Apply at temperatures between +5°C and +35°C. Avoid working on frozen surfaces or in direct sunlight.
Consumption: 2.5–5 kg/m² depending on tile size and layer thickness (3–10 mm).
Drying time: Walking on the surface is possible after 24 hours, full load after 7 days.
Precautions: Use protective gloves and goggles, avoid inhaling dust. In case of contact with eyes, rinse with plenty of water.
Storage conditions:
Store in a dry place at a temperature of +5°C to +30°C in an intact package. Shelf life is 12 months from the date of production.
Country of origin:
Uzbekistan
