White EPA Granite Adhesive

Specifications:

• Type: White Cement Tile Adhesive

• Color: White

• Packaging: (specify actual, e.g. 25 kg)

• Purpose: Fastening of granite, marble, porcelain stoneware, tiles

• Consumption: 3–5 kg/m² (depending on tile size and layer thickness)

• Layer thickness: 2-10 mm

• Adjustment time: up to 20 minutes

• Setting time: 24 hours (full strength after 7 days)

• Application temperature: +5°C to +30°C

Properties:

• High adhesion to mineral substrates

• Slip resistance when mounted vertically

• White color – prevents changes in the shade of the cladding material

• Moisture and frost resistant

• Suitable for underfloor heating systems

Scope of application:

• Interior and exterior walls and floors

• Bathrooms, kitchens, swimming pools

• Stone and ceramic coatings

Limitations:

• Do not apply to loose or dusty substrates

• Do not use at temperatures below +5°C and above +30°C

Instructions for use:

1. Prepare the substrate – clean dust, dirt, grease and fragile areas

2. Pour water into a clean container (about 6-6.5 liters per 25 kg of dry mix)

3. Gradually pour in the glue, mixing with a mixer until smooth

4. Soak for 5 minutes and stir again

5. Apply with a notched trowel to the surface and install the tiles

6. Adjust position for 20 minutes

7. Allow to dry for at least 24 hours before grouting